Indoor air sampling
A pump draws a measured volume of air, often about 15 liters per minute for five to ten minutes, through a spore trap cassette. The lab counts and identifies spores per cubic meter.
Whether you're dealing with a landlord, a home sale, or a family member who feels worse indoors, call Breffni Remediation. We'll connect you with an independent mold tester in Pineville who gets you lab results you can stand behind.
Not every situation needs a lab. But when there's a dispute, a sale, or a health question, numbers from an accredited lab settle arguments that eyeballing can't.
Real people pick up 24/7.

Sloppy sampling produces meaningless numbers. These are the standards we expect from the testers we refer.

Testers use calibrated air pumps with spore trap cassettes, sterile swabs, and tape-lift slides, and always pull an outdoor control sample for comparison.
Pricing is set per sample before the visit. No surprise lab charges after the results come back.
Calls are answered 24/7 and routed to a tester near Pineville. Standard lab results usually come back in two to three business days, with rush options available.
Testers in our network carry their own insurance and any licensing your area requires. Ask whether samples go to an AIHA-accredited lab; good testers say yes without hesitating.
The right test depends on what you're trying to prove. These are the common options.
A pump draws a measured volume of air, often about 15 liters per minute for five to ten minutes, through a spore trap cassette. The lab counts and identifies spores per cubic meter.
Clear tape or a sterile swab picks up material from a suspicious stain so the lab can confirm whether it's mold and which genus it is.
A small port lets the tester sample air inside a wall without opening it, which is useful when you suspect growth behind finished drywall after a leak.
Clearance testing gives you proof the remediation worked before walls are closed up or tenants move back in.
When two sides disagree about mold, accredited lab results with proper paperwork are hard to argue with.

Straightforward, start to finish.
Tell us why you want testing: a smell, symptoms, a dispute, a sale, or clearance after removal. The goal decides which samples make sense.
A local tester arrives with calibrated equipment, takes an outdoor control, and samples the rooms or surfaces you're concerned about.
Samples go to an accredited lab. You already know the cost from the upfront quote, and you'll know when to expect results.
The tester walks you through the results, compares indoor and outdoor counts, and gives a clear recommendation.

Call and we'll connect you with an independent tester near Pineville who can sample this week.
Call +1-844-326-4757 Now
Here's what some recent callers shared.

My landlord kept saying the spots in my bedroom were just dirt. The lab confirmed two types of mold on the wall, and the air sample was well above outdoor levels. That report got the repair done.
After paying for remediation, I wanted proof. The clearance air samples came back lower than the outdoor control, and I finally felt comfortable moving my kids back into the basement.
We were selling and the buyer asked about a past leak. One wall cavity sample and an air test showed nothing unusual, and the deal closed on time.
The tester explained the numbers clearly instead of just emailing a PDF. Knowing what was normal versus elevated made the whole thing less stressful.
Air sampling measures spores floating in a room compared with outdoor air. Surface sampling identifies what's growing on a specific spot. Many situations call for one or the other, not both.
Mold spores are always present outdoors. The outdoor control sets a baseline, so indoor results can be judged by whether they're higher or contain different types than outside.
Standard lab turnaround is usually two to three business days. Many labs offer 24-hour or same-day rush analysis for an added fee.
Settle-plate kits from the hardware store almost always grow something because spores are everywhere. Without an outdoor control or measured air volume, the results can't tell you much.
There are no federal limits for indoor mold spores. Results are judged by comparing indoor samples with outdoor controls and looking for water-damage indicator species.
ERMI analyzes settled dust using DNA methods to identify mold species. It's sometimes used in health-related investigations, though most residential decisions rely on air and surface sampling.
Homes, apartments, offices, and rentals across Pineville can all be sampled through one 24/7 call.
Zip codes covered in Pineville include 28134.
Just outside Pineville? Check the list below or call to confirm.
Call +1-844-326-4757 to Confirm